950高速辊式熨平机

高速辊式熨平机(950系列)High speed roller ironer(950 Series) 国内首创 3项国家专利  平安财产保险承保National initiative 3 national patent, PINGAN insurance 950高速辊式熨平机的性能优势:速度快---最高可达50米/分钟1.High speed---

类型 : 双面烫
价格 : 电议
品牌 : 西耳门
型号 : GYP-3500Z-950

高速辊式熨平机(950系列)

High speed roller ironer(950 Series)

 

国内首创 3项国家专利  平安财产保险承保

National initiative 3 national patent, PINGAN insurance

 

950高速辊式熨平机的性能优势:

速度快---最高可达50/分钟

1.High speed---The fastest speed can be up to 50meters per minute

能耗低---床单每小时蒸汽耗量约420公斤,每小时耗电约4.5

2.Low energy consumption---the steam consumption of sheet is about 420kgs per hour, the electricity consumption is about 4.5 degree per hour.

效率高---CLM展布机、快速折叠机配套使用,每小时床单最高可达1200条,被套可达850

3.High efficiency---Working with CLM feeder and fast folding machine , can iron the max qty of sheet is 1200pcs/hour, and the bed cover is 850pcs.

950高速辊式熨平机的6大高速原因:

6 reasons of high speed:

高速原因1 烘筒采用热传导性能更佳的优质锅炉碳钢制造,锅炉碳钢热传导性是不锈钢的2.5倍。

Reason of high speed 1: Adopt high quality boiler carbon steel with better performance of heat conduction. The heat conductivity of boiler carbon steel is 2.5times than stainless steel.

高速原因2 烘筒壁厚达到12mm,最高可承受1mpa蒸汽压力,安全可靠,使用放心,且筒壁厚储热量大,同时也保证了布草的受热均匀和平整度。

Reason of high speed 2:The thickness of roller is 12mm, and can bear pressure 1mpa steam pressure, which ensure safety operation and big heating storage cylinder wall guarantees the heating balance and ironing flatness of linen.

高速原因3 重型结构设计,两边的箱体材料厚度达到16mm,整机重量达到了16.5吨,并由进口数控激光切割加工,有效的保证了产品的强度和精度。

Reason of high speed 3:Heavy structure design, both sides of cabinet up to 16mm thickness. The whole machine is 16.5tons. It is processed by imported CNC laser cutting machine and assures the strength and precision.

高速原因4 本机机架、箱体全部采用重型设计,烘筒以及所有轴类全部采用精密加工,确保了本产品高速运行的前提条件,熨烫速度最高可达50/分钟。

Reason of high speed 4:All structure and cabinet adopt heavy design.Cylinder and all types of roller adopt precision machining that assures the ironing speed up to 50m per minute.

高速原因5在烘筒入口处,设计了三根弹性压紧辊,布草30%的水分可在此间蒸发。

Reason of high speed 5:At the entrance of roller there are 3 pieces of flexible hold-down rollers, which can take 30% moisture out of the linen.

高速原因6布草包裹的角度达到了300度,采用双面熨烫设计,同时也提高了被套的熨烫质量。

Reason of high speed 6:300 degree linen contact with roller, adopting two sides ironing design improves the working efficiency and lower cost. Especially improving the ironing quality of quilt cover.

 

节能设计:

The design of energy saving:

整机所有电动功率只有6kw,并且采用变频设计。

1.The motor power of whole machine is only 6KW, and adopt the frequency conversion design.

烘筒两头、箱体四周、所有蒸汽管道做了保温施工,使蒸汽消耗降低了5%

2.The two sides of rollers, the surrounding area of cabinet and all steam pipes had been constructed to keep the warn, the steam consumption is down by 5%.

电脑控制可编程设计,可根据熨平机工作节拍,自由设定熨平机预热、工作、中午休息、下班各个环节蒸汽供应时间,对蒸汽使用实施了有效管理,可以有效降低蒸气消耗,相比普通熨平机蒸汽消耗有效降低近25%

3.Computer control and programmable design, accordingly to the working of ironing machine, freely set the ironing machine’s steam supply time when pre-heating, working, mid-rest, off duty. Adopt the effective management of steam use, can reduce the steam consumptions effectively. Compared the common ironing machine, the steam consumption is reduced nearly to 25%.   

安全设计:

Safety design:

1、烘筒采用锅炉碳钢材质,相比不锈钢抗压性能更佳。

1.The roller is made of boiler carbon steel, the pressure resistance is better than stainless steel.

2、烘筒壁厚达到12mm,承压设计按1.5mpa设计,测试压力按1.2mpa测试,最高工作压力按1mpa,安全可靠,使用放心。

2.The thickness of roller is 12mm, and the design of  bear pressure is 1.5mpa , test pressure is 1.2mpa, the max working pressure is 1mpa, Safe and realiable.

3、本机总蒸汽入口设计了“泄压阀”,只要供应蒸汽压力超过1mpa,控制系统进入工作状态,自动关闭整机蒸汽供应,直到蒸汽压力恢复正常为止。

3.The relief valve is designed at the entrance of total steam inlets, as long as the supply of steam pressure is more than 1mpa, the control system is into work. Automatically shut down the steam supply of whole machine, until the steam pressure returned  normal.

 

高品质平整度设计:

High quality flatness design

所有烘筒表面经过研磨处理,光洁度高,有效提高了布草熨平质量。

1.The surface of all rollers are grinded and processed , high finish,  which effectively improve the ironing quality of cloth.

第一组烘筒全部采用“双面烫”设计,提高了被套熨平质量。

2.The first group of rollers are all designed double-sides ironing ,which effectively ensure the ironing quality.

所有烫带具有张紧功能,自动调节烫带的张紧度,提高了熨烫质量。

3. All ironing belts have tension function, which automatically adjust the tensions of belt, improve the ironing quality.

稳定性设计:

The stability design:

整机采用重型机械结构设计,整机重量达到16.5吨。

1.Heavy structure design, and the whole machine is 16.5tons.

所有导布辊全部采用高精度特制钢管精加工而成,保证了烫带不跑偏,同时也保证了熨平质量。

2.All guide rollers are high precision special steel pipe processed by fine machining, which effectively ensure the ironing quality, avoiding guide belt slant.

主要电器原件、气动原件、传动部件、烫带、疏水阀等主要部件全部采用高品质进口产品配套。

3.The main components of main electric appliance, pneumatic components, transmission parts, ironing belts all all high-quality imported.

CLM高速熨平机主要技术参数:

The main technical datas of high speed roller ironer

规格型号 Model & Specs

GYP IV(四辊)(4 rollers)

烫辊长度(mmLength of ironing roller

3000/3300/3500

烫辊直径(mmDiameter of ironing roller

950

熨烫速度(m/minIroning speed

≤50

蒸汽压力(MpaSteam pressure

0.11.0

电机功率(kwMotor power

6

整机重量(kgOverall weight

16000/16500/17000

外形尺寸(mmExterior dimension

(××高)(length*width*height)

5050×4750×2260